Näytetään tekstit, joissa on tunniste Cooling. Näytä kaikki tekstit
Näytetään tekstit, joissa on tunniste Cooling. Näytä kaikki tekstit
perjantai 27. kesäkuuta 2014
Better, yes?
I improved the Air Intake Filtering System (AIFS, as I like to casually call it) a little bit. Still not the prettiest thing on the planet, but a little less protruding at least. I'll try to fix it a little more permanently once I have the new cells in.
On that note I have eight new CALB SE40AHA cells ready to rock. I noticed they have new cool vents with a little round cap on them that says CALB. I'll be sure to put these cells in the motorcycle so that they'll be the most visible ones. As for the bottom balancing, taking place here in the picture, I set my Professional Bottom Balancing Tool (or PBBT) to 2.7 volts, so the cells drained in parallel to 2.69 volts. The next day after disconnecting them from everything, including each other, they were at exactly 2.71 volts each. Shows that doing this in parallel works, all cells are good (bad cells would go down by themselves) and they are quite identical in all intents and purposes.
perjantai 13. kesäkuuta 2014
Air cleaner and water intake prevention
Since it's been raining cats and dogs for a few days and preventing me from driving the bike to work I got anxious to do something about the waterproofing of the DC motor in the kWsaki. Here's what I've come up with.
The tower consists of Biltema part numbers 88463 (hidden inside), 32323 (air filter) and 88471. I have an 8" fan which I'm also planning to put inside the big adapter piece, so that the motor will always have more than enough airflow, even at low rpm. I just don't have the fan with me right now. Pictures of the installation later.
Update: If you're wondering what this has to do with waterproofing, my thinking is that adding the filter and moving it a little further away would mean less water in the motor. Water entering the filter at standstill should also not find it's way inside the motor nearly as much as it does now. This setup also gives me the option of moving the intake filter somewhere else using some flexible tube.
The tower consists of Biltema part numbers 88463 (hidden inside), 32323 (air filter) and 88471. I have an 8" fan which I'm also planning to put inside the big adapter piece, so that the motor will always have more than enough airflow, even at low rpm. I just don't have the fan with me right now. Pictures of the installation later.
Update: If you're wondering what this has to do with waterproofing, my thinking is that adding the filter and moving it a little further away would mean less water in the motor. Water entering the filter at standstill should also not find it's way inside the motor nearly as much as it does now. This setup also gives me the option of moving the intake filter somewhere else using some flexible tube.
Tilaa:
Blogitekstit (Atom)


