Näytetään tekstit, joissa on tunniste kWsara. Näytä kaikki tekstit
Näytetään tekstit, joissa on tunniste kWsara. Näytä kaikki tekstit

keskiviikko 13. toukokuuta 2020

Gave up and installed a BMS

Yes, it's true. I gave up and installed a BMS. A Battery Monitoring System, that is. Not the kind that drains a few of your cells and then their buddies destroy them at the earliest opportunity. No, the kind the measures two voltages. Whole pack voltage and half pack (more or less).

 The brains of my BMS.

In my case the half pack is the first 13 cells. What this gives me is four interesting figures:

  • Average cell voltage (total voltage divided by number of cells)
  • Average cell voltage for the first 13 cells (their total voltage divided by 13)
  • Average cell voltage for the last 12 cells (total voltage minus first 13 cells divided by 12)
  • Difference in average voltage between first 13 and last 12 cells.
That last bit of information is very interesting, because if it is more than say 0.2 volts, there must be a problem with one of the cells in either part of the pack. All data goes to my Zabbix server, which can alert me, if that happens. I also have Grafana set up, so I can some pretty graphs too.

Now you may ask how do I measure the first 13 cells and not cause an imbalance? Well done, my young Padawan, that is the right question. Well, I have a relay in the loop, which only connects the first 13 cells for a very short time, less than a second, currently every three minutes. The load imposed on the first 13 cells is also something like 0.1 watts. This should not cause a problem even in the long run. And if it does, I'll know about it.

I've used a LinkIt Smart 7688 Duo for a couple of IoT things now, so that's what I used here too. You can get easy to user Grove parts with sensors and the like from Seeed. They're really quite handy if you're as lazy as me and don't want to be soldering every last thing yourself.

Solar controller for charging the car.

I also now charge the car on solar. I have a couple of panels installed which actually charge my motorcycle first and from there I can charge the car, if it pleases me. But more on that later. The motorcycle has had a bit of a make-over as well. It's been about two years since the last post, so if you waited this long, perhaps you can wait a bit more for those as well. Anyway, good times.

ps. Don't pay attention to the grounding cable on the battery box. I've been meaning to hide it for six years now. It's going to happen any day now. Really. Maybe.

maanantai 27. elokuuta 2018

Showing off



I got caught on video, mostly about the car conversion. Finnish only, I'm afraid.

The link to the video here has been removed due to the maker of the video becoming an antivaxxer and even harrassing children about it. I will not promote any of his work on any of my platforms.

sunnuntai 19. marraskuuta 2017

Still alive


Zoe has been working great. I have well over 10.000 km on the clock now and the only issue I've had is the "Check ELECTRIC System" error which occasionally pops up on the display, but apparently it's much less serious than it sounds and nothing to do with the high voltage system. I'll mention in the first service next year, but that's all. Also funny are some of the translations from french, for example pre-heat is pre-soak. Well, the weather has been quite a soak this fall. The 40+ kWh battery is amazing and I've actually pretty much stopped looking at the range meter. It's more like with an ICE car where you just know or notice that it's time to fill up instead of continously monitoring the state of charge.

The converted Citroën Xsara is also working as usual. Had to have it's yearly inspection done and still nothing to fix on it. The brakes could be better, but they still get the job done in city driving. I did notice that the ethanol heater I have in the car wasn't putting out much heat, but turned out I just had to bleed the "cooling" system. Luckily it's really easy to do and the heat was back right away.

tiistai 5. heinäkuuta 2016

A Leaf among other things

So, yeah, got a Leaf. Traded in the C-Zero. It was a nice little car, but more range is more range. Something like 50% more. The Leaf I got can get about 19 kWh on a full charge and 18 kWh from a quick charge. Much more than the C-Zero, which was down to something like 14 kWh, making the usable kWh between quick charges aroung 12 kWh. Plenty for in town, but not so much between towns.


I also kinda sorta started putting the electric kWsaki motorcycle back together. I've been bottom balancing the 40 Ah cells I have left. Looks like I might be able to put together 29 anyway, even though many of them bloated previously. They seem to hold voltage now, so I'll just have to drive them to see if they keep working ok. Eight of them have been in the Xsara, four as an extra battery to take it from 25 to 27 cells (two 40 Ahs in parallel, since it has 60 Ah cells) and two as it's 12 volt battery. 

Having a higher voltage on the Xsara might have caused it's DC/DC converter to blow up, but as is often the case with something blowing up I've also learned something. Turns out the issue I had with the 12 volt system was caused by the DC/DC converter. It was quietly draining the 12 volt battery when it didn't have high voltage connected, thus causing me to loose a few lead acid batteries. Well, now I know not to leave a DC/DC converter always connected. You need to disconnect them from high voltage to keep them draining the traction battery and from the 12 volt battery for the same reason. Nasty buggers. I've also learned that I don't really need a DC/DC converter in the car. At least with four LiFePO4 40 Ah cells in series it works fine without and the battery stays full instead of the car draining it.


Also the 2000 W 87.6 V charger I originally had in the car seems to be ok as well. It just had blown a fuse when I last had it in the car. D'oh. Well, I replaced the fuse and it's working again. Very happy about that. Now I just have to decide what to do with the controllers. I have the better 120 V 600 A controller in the car, but the higher voltage pack available for the motorcycle as well as a 102.2 V charger for it. Not sure if the 72 V (90 V max) AXE7245 I had in the car and before it in the motorcycle is completely functional though. It started go offline while driving, which is why I put the 600 A Kelly into the car. I guess I'll figure it out eventually. I haven't been driving the Xsara after I got the Leaf though, so I might just store it and put the better controller into the motorcycle anyway.

perjantai 15. tammikuuta 2016

Heating my EVs

I'm sure I've covered the heating in both of my EVs, the cars at least, in previous posts, but I though I'd write a new one about them and how they've been doing.

As you may or may not know, I heat both of the cars with ethanol. In Finland it's easy to get locally produced bioethanol, which is made from biowaste, so it's basically free energy in the sense that it only requires a little work to make a burnable liquid from it. It doesn't add to the carbon burden on our climate, because it's not something stored underground and pumped into the air. It's already here and it's just recycled into something useful.

The C-Zero obviously has a electric liquid heater already, but it's not very powerful and yet it consumes a lot of power. It can take up to 5 kW and when you consider that the car only has a 16 kWh (nominal) battery, you can see that it will easily eat up a third of the pack capacity in an hour. To make matters worse, any used EV will not have it's full capacity left, like mine which only has about 14 kWh left, so it's even worse. And it doesn't even really get your toes warm even if you have it on full blast. It'll keep you a alive, for a short moment, but that's about it.



The heater I have in the C-Zero is a Binar 5B from Autoterm:
https://autoterm.eu/en/shop/engine-preheaters/binar-5b-12v-bensiini/

It's made in Russia and meant for Siberian winters. I'm not sure if they've completely managed to hit that target or is it because I've been using ethanol only, but so far in the 15 months I've had it, I've had to replace he glow plug twice and I'm just about to replace the fuel pump. It may be that especially in the most harsh winter conditions we've had here I might have been better off using gasoline. I had left the car sitting outside for three weeks during the holidays and when I got back the fuel pump wouldn't work anymore. Ok, it had come down to -25˚C, so it wasn't exactly sunny, but still. I was a little disappointed. Why I've had to replace the glow plug twice, I have no idea. I do think that the ethanol is not as flammable as gasoline (I couldn't get a bonfire started with ethanol), so maybe that's it.

In any case, Autoterm has a 2-year guarantee on their products and they've come through nicely. I've got new plugs from them and a new fuel pump just arrived today for free, so it's mostly only been the annoyance of the heater being broken and having to fix it. Then again having to fix stuff is something I've known to have taken pleasure in.



In the Xsara I'm burning the same bioethanol, but with a different heater, a german product called Webasto Thermo Top E. This one I got from a junk yard for 150€, so it was very affordable. Actually the first one I got didn't work at all, but they let me just swap it for another, which did work right away. The fuel pump didn't come with the burner, so I had to buy it separate from ebay, which added about 50€ to the cost. The burner is also a gasoline model and this manufacturer doesn't guarantee it to work with ethanol, unlike Binar, but I just tried it and haven't had any problems with it.

Actually this burner has been the most reliable of the two. Even though it had seen some heavy use for several years and the pump was a used one too, there has been zero problems with this one. It's also smaller than the Binar and the water pump is right there at the device. It has sort of made me regret that I didn't try to look for a used Webasto for the C-Zero as well, but then again it sort of made sense to use a new part in a newish vehicle. I also might not have been able to find another for such a good price. Usually they ask Binar-like prices for even used Webasto brand burners and the spare parts are expensive as well.



The Binar does have a couple of other things going for it as well. It has a display (in the picture) which shows the "coolant" temperature, so you know what's happening. It's also more powerful than the Webasto, 5 kW vs. 4 kW. The Binar hasn't had a problem getting up to 70-80 ˚C in any weather, whereas I think the Webasto might not have been quite powerful enough in the coldest days. On the other hand it doesn't show the temperatures so it's a bit more based on a gut feeling and it's the only method of heat in the Xsara as well. Additionally, the coolant pipes in the Xsara were quite long and exposed, so I just added some insulation on them the other day, which might also make a difference. I could also test if gasoline would improve it's heat output. In any case when it's not been terribly cold it has been more than enough.

One thing you need to keep in mind with these heaters is that they're not going to keep the coolant at a set temperature at all times. They will cycle so that first they will run on full blast to get the coolant to 70-80˚C and then go to a low power mode and restart the full power if the liquid temperature goes down to 40-50˚C. So they heat output is not going to be exactly the same at all times.

The way the heat works in the C-Zero (and all i-MiEV based cars) is that when you have the temperature knob on hot (or previously had it on hot before setting it to neutral) it will blast all the heat it gets from the heat exchanger. It will not mix any cold air into it. So you need to regulate the hot airflow with fan speed if you have a burner. The idea originally has been that the knob's heat setting directly controls the coolant target temperature of the car's own electric heater. If you turn the temperature knob to cold and either keep it there or turn to neutral without going on hot, it will only put out cold air into the cabin and no heat from the heat exchanger. Also the car's original coolant pump only runs when the knob is on the hot area. The burners I have also have their own pump, so they don't need that car's pump to be running, but it's something to keep in mind. I haven't had any problems with having two coolant pumps in the system running independently.

What I generally do is that on a really cold morning I keep the temperature knob on neutral (having had it on hot previously thus keeping the air going through the heat exchanger) and only start the ethanol burner. Once it's up to temperature, I may switch the temperature knob to one step into hot, just to make both coolant pumps run. It's not strictly necessary though. If the burner is stopped (manually or by it's timer) I can then leave the know on 1st heat step, let the car's pump circulate the still hot liquid to get the most of it's heat into the cabin and perhaps let the electric heater to keep the liquid lukewarm once it's cooled down. Sometimes I might also immediately have both on, with the heat on 1st step, to get some heat into the cabin as soon as possible, but still leaving most of the heavy heating for the burner.

Update: The heaters will burn about 0,5 to 1 liter of ethanol per hour.

torstai 15. lokakuuta 2015

What's up

It's been a little slow on this blog lately. Which doesn't mean I haven't been busy. Let's start with the converted Xsara. It's 12 V aux battery woes have continued. Also contributing to the issue is your's truly, forgetting the vehicle running and so on. So it seems I killed another lead acid battery. Maybe it's a hint I really should take and just not use them anymore at all anywhere again. To replace it I put in four of the worse 40 Ah SE40AHA lithium cells I had around. Worse because they don't really keep their voltage really well and are at least a little soft shorted inside, but not completely.

With those four cells in the can serving the purpose of aux battery I set off to the local inspection office to have the vehicle checked, as is required every year. This time I had no less than three officers looking under the hood and asking questions about the electric powertrain. The brakes have seen better days, but the car still passed. I should still take them apart and at least try to salvage the discs.

It seems there were no pictures taken of the battery swap or the inspection itself, but there are pictures of something I did a little earlier. The repaired 87.6 volt charger gave up the ghost again and this time I pretty much gave up on it. Again, I suppose, but not willing to pour any more money into it.

So thinking about how to solve the issue again, I decided I'd add some more batteries into the vehicle. It has 60Ah cells, but since I have those abused 40 Ah cells around from the motorcycle, I decided to augment the pack with a couple of them in parallel. Turns out I can just about get away with a string of 27 cells with the AXE 7245 controller in the car. It has a maximum voltage of 90 volts, but it will start if the voltage, as presented by Cycle Analyst, is less than 91 volts. With the 27 LiFePO4 cells in series and fully charged, I end up a little over 91 volts, but if I let the DC/DC converter run for a bit the AXE will relent and start up. This gives me about 400 Wh more to drive around with bringing the pack total a little over 5 kWh.



It's a bit of a mess, but there they are. I was sort of hoping I could use my 102.2 volt charger directly when increasing the cell count, but I had to put into a bit of monitoring in the end. It looks at 20 cells in the middle of the pack and makes sure they stay within 3.5 volts on average and then it tells the 102.2 volt TCCH/ElCon charger to stop charging until the voltage goes back down. Not optimal, again, but it works for now.

On the C-Zero I received a shifter cover panel from Ben Nelson, who has a flooded i-MiEV his parting out now. It took a little bit of fiddling to get it in the car, but I managed to do it and now it really looks the part. Thanks a lot for part, Ben!


Last, and probably least as well, but still quite important is the addition of two new USB charging ports I added to the C-Zero. I can turn them on or off with the switch. They're always connected to the car's aux 12 V battery, so I can provide power to some devices even though th car is not running. Very handy for CaniOn, which I've also configured to turn on when the phone which is permanently in the vehicle gets power, so I can always easily see what's really going on with the battery.



torstai 27. elokuuta 2015

Back to the original charger

The cheap charge controller I had installed gave up the ghost - or more like stopped reading the pack voltage correctly - and the next option, installing a PowerLog 6S to monitor the pack, also ended up with some smoke escaping and thus rendering that device inoperational as well. They run on the magic smoke, as you know. I now have some more electronic junk to be taken to recyling.

Cheap and readily available options exhausted, I figured what the hell, perhaps a local electronics repair shop could fix the original charger. The one that actually charges to a correct voltage right away. And what do you know, a couple of days in the care of Porin Radiohuolto and I once again had a working charger. Had to depart 85 euros for the job, but it's well worth it. These chargers do run at least around 500 € from China.

It had blown a fuse and a couple of caps had swollen, so they had replaced those. I had already suspected that I might have in fact aided in it's downtime by having it connected to the pack permanently, even while driving. It may have gotten on those caps a little and caused the fuse to blow.

So installing the charger back into the vehicle now, I added an 80 amp 12 VDC contactor, which only closes and connects the charger to the pack when the car is plugged into the mains. In the same power inlet as the main charger I just have a 12 VDC PSU originally from a Linksys router, which activates the contactor. I had a timer circuit as well, but decided to leave that out, just to keep it simple. In addition to the charger and the PSU there is also a aux battery charger, which keeps the small 12 VDC lead acid battery of the vehicle topped up.







sunnuntai 26. huhtikuuta 2015

Update on charge controller

Noticed something nasty with the charge controller setup in my previous post. I really should have thought of this, but the 100V voltmeter is not isolated. It will connect your high voltage pack negative to your 12V negative, which is your vehicle ground. Not cool. In fact so not cool, that it seems to have killed at least one, probably two 12V lead batteries I used in the vehicle as the aux battery.

So, lesson learned, again, always check your pack isolation after you install anything that connects to it. Check voltage between both positive and negative ends of you high voltage and the vehicle chassis. If you see the pack voltage or something like it, you have a problem. If you get some fluctuating, small voltage, you probably don't have a problem. Note that with a brushed motor, you can end up having dust from the brushes build up and create a short, so it's not a bad idea to check even if you don't install anything new.

lauantai 28. maaliskuuta 2015

Charge controller


Went ahead and installed the simple 100V solar controller. It takes 12 volts and the pack voltage. When pack voltage reaches a set value, it will disengage a relay. It's set to disengage at 88 volts, which is a little over 3.5 volts per cell. The relay then controls the Elcon/TCCH charger's Enable pin, which will instruct the charger to stop charging.

Of course as the pack voltage drops, the controller will re-engage the relay and the charger will resume charging. This will make the pack voltage bounce back and forth pretty much forever, so it's not a perfect solution, but it should make sure the charger doesn't overcharge the pack right away. On the other hand there's no CV phase, so the bouncing is kind of necessary to get the pack full.

In any case, this solution will have to do for now.

torstai 19. maaliskuuta 2015

It's dead, Jim


First things first. Godspeed, Mr. Leonard Nimoy and GNU Terry Pratchett. Also dead is my 2kW KP charger. Coincidence? Maybe, maybe not. In any case, I'm a little short on chargers (and great minds). Luckily, I have the Elcon/TCCH 2500W charger from my temporarily defunct electric motorcycle.

As it happens, the Elcon charger is set for 102.2 V, which is way too high for the 25 cell pack in the car, but it will still start charging although the initial voltage is lower than expected. For the 25 cells the 102.2V would be about 4.1 volts per cell. Not into dangerous territory, but not very good for the cells either. So you either need to watch the voltage carefully while charging or device something to end the charge earlier.

Knowing my tendency to forget things, an automatic shutoff would be much safer. Luckily I've had some experience with one of these voltmeters. It can measure up to 100V and control a relay based on that, among other things. I have one in my bottom balancer, but I'm reluctant to take that well functioning setup apart, which is why I've put another on order from ebay. Once it arrives I'll set it up to control the ENABLE wire on the Elcon charger, so that it will end charging at 87-88 volts. Actually it will bounce back and forth, but at least it will give me more time to pull the plug.

Or, as I just recalled, I also have a CellLog 6S, which I haven't come up with a use for yet. I could also set that one up so that it would monitor five series of five cells and control the charger as well. In that case the cutoff voltage would be 17.5 volts for five cells. It would even be more accurate, since it would monitor five cells at a time, instead of the whole 25. Certainly something to consider. On the con side, it does require more wiring, but maybe it would be worth it. We'll see.

Technically, the Cycle Analyst display could also do the job, but it would require opening the CA case, adding some wires, using a solid state relay and so on. A lot more work, all in all.

sunnuntai 15. helmikuuta 2015

Check your connections


I've been aware of the possibility of cell connection bolts loosening over time. There are ways to combat this, such as using braided straps and nord-lock washers. Having been reminded of these techniques by several recent YouTube videos, I thought I'd check my cell connections.

I've been cheap, as usual, so I've just used the plain copper interconnects supplied by GWL Power along with the bolts and washers which come with them. It's also been nearly a year since I put everything together, so I was interested to find out if they had indeed loosened. I had also noticed that the pack temperature does rise quite a bit while driving. No visible signs of extra heat were noticeable though.

Turns out not only where several bolts quite loose, I had even forgot to put in all the washers. So yeah, don't forget to check your battery bolts regularly, especially if you don't use nord-lock washers.

maanantai 24. marraskuuta 2014

Winter update

That's 3.7˚C

It's been a little slow on the blog side, but in the real life I've been driving both of our electric cars regularly. Even exclusively, since I sold my diesel car and we're now all electric with two cars and a motorcycle. Hooray!

The DIY car got a little winter update in the form of a cabin heater, which I bolted on to the side of the battery box in the trunk. It gently heats up the aluminum box with the cells inside, but mostly the cabin of the vehicle. The little thermometer has it's sensor inside the box, in the middle of the pack and between the cells. It really hasn't shown temperatures below zero yet, since both charging and driving seem to keep the cells well heated. Instead I've seen temperatures close to 30˚C even with the outside temps hovering around or slightly below freezing. Currently the car has no batteries in the front that would need heating, so the single PTC heater takes care of everything.

With no batteries in the front of the vehicle, it should not come as a huge suprise that even though I bought some studded winter tires, they don't grip very well in the front. It could also be that they are "Aurora" branded tires, which are hardly recommended. Should get me through the winter though. 

Also in the picture behind the big charger is a smaller, grey 12V charger. My 12V AUX battery hasn't  been very happy with just the occasional 13.5 volts it gets from the DC/DC converter while driving, so I installed an automatic lead battery charger to keep it charged at all times. It's connected to the same 230VAC input as the main traction pack charger, so it automatically charges the AUX battery whenever the main battery is charging. Quite like the C-Zero, where the DC/DC converter also is always on while charging.

The car has two 230VAC plugs in the rear, which means that I can choose between heating and charging simply by choosing which plug to plug in to.

As for the C-Zero, it's also working great. I installed a Binar ethanol burning 5kW heater to keep it usable over the winter as well and also a 230VAC plug for a electric cabin heater. It's been a great vehicle and fun to drive. The only thing I'm really missing is Cruise Control. It would make keeping a steady economical speed a lot easier than it is now.

perjantai 25. heinäkuuta 2014

Adventures in Tireland

The rims that were too good to be true.

So I got those rims from a Peugeot 307, the same car I use for long distance travelling, and purchased 195/65R15 Michelin Energy Savers for them. They seemed quite nice under the kWsara and were dead silent, but alas, it was not meant to be. Hitting a bump made a nasty sound and in the end I just had to back off and get 175/65R14 tires for the original 14" steel rims. They didn't have Michelins in that size, so I chose Continental Premium Contact 5s. They're not quite as quiet, but still a lot quieter than whatever old tires I had on previously.

I'll use the Energy Savers on the alloy rims in my 307 probably next summer, when my current Nokian Hakka Greens are probably starting to run out, so it's not a real loss to have those two sets around.

I just can't emphasize enough how quiet the Michelin Energy Savers are. Definitely my go-to tire as of now.

perjantai 11. heinäkuuta 2014

New charger for kWsaki

Yesterday, I finally got the new charger for the kWsaki. DHL and their local agent tried to make it as complicated as possible, but finally I just drove to their warehouse at 17.20 on a Friday and picked the damn shipment myself. Luckily they were still there. I think I'll specify pickup from there now on.


In the usual evassemble.com fashion, the charger was very lightly packaged and once again came in a little damaged. This time it was one of the cooling fins. Shouldn't be a problem, though. It's a little bigger than I thought, but I still believe I should be able to fit it under the frame and within the bottom fairing.


The charger seems to have been correctly configured, at least according to the sticker. It says 28 cells, but I'll use 29 instead. I just didn't want to complicate their life by specifying anything out of the ordinary. 102 volts divided between 29 cells comes down to about 3.52 volts per cell. The charger, charging at 21 amps, should fill my 40 Ah cells in about two hours, while using 11 amps at 230 VAC.


Look! It came with instructions too! "Connet black and red wire together to start automatic control." Yes, that was the only documentation in the package. In that box there was the control cable which the comprehensive documentation refers to and an additional Anderson connector. Most likely I'll just leave the Anderson connectors out, because they're mostly just asking for trouble.

tiistai 8. heinäkuuta 2014

Regarding temperatures

While doing the battery test drive for the previous post we also had the hottest day of the summer so far. Temperatures were around 28 degrees Celsius. Very hot for these parts. Just last week we had more than 10 degrees less, albeit it was particularly cold then.

After driving the battery empty in two 30+30 minute drives, with about 30 minutes in between, both the motor casing and the controller case showed an external temperature of around 60 degress Celsius. Rather hot, but the motor is rated for 80 degrees and the controller starts throttling gradually at 85 degress Celsius, so not a problem. I didn't notice the controller throttling while driving. I did curse myself for not logging it's data though. It would have been interesting.

The DC/DC converter wasn't really even warm, but the aluminum sheet that both the controller and the converter are attached to did show temperatures close to 50 degrees, so it was working as a heatsink as planned.

As for the batteries, in their closed and rather insulated case, were also noticeably warm to the touch. My infrared meter showed them at around 50 degrees. Kind of approaching uncomfortable zone, but not reaching it. I did however check how the temperature reacted while charging. It didn't go up, but instead came down to 45 degrees rather quickly and I didn't notice it going back up. All good then.

Ambiguity of energy consumption

Yesterday I took it upon myself to see just how far I could get with just the single set of 60Ah CALB SE cells that I currently have in the car. That part of the equation is rather clear. It's 25 kilometers or a little over 15 miles. How much energy was used, now that's a different question altogether.

I did measure the amount of energy used by the charger to charge the pack from quite empty to 87.6 volts or 3.5 volts per cell, with a CC/CV charge pattern. The result came in at 5.8 kWh. Now I don't know how accurate my cheap watt meter is, but if we assume it's anywhere near the thruth, the mileage from the wall was 232 Wh/km. Not bad, considering it was mixed city driving and no regen.

I suppose that's actually the most realistic way of measurement. After all, it determines how much you'll end up paying for your kilometers. That comes down to a little over 2 cents per km with our electricity prices, by the way. Or 2,32€ per 100km.

Nevertheless, it would be nice to know how much the actual driving uses. If we assume 90% efficiency in charging, we get 5220 Wh. Or about 209 Wh/km. Even better. The pack should however contain about 4800 Wh, or 60 Ah times 80 volts. That way the result is 192 Wh/km.

My Cycle Analyst however sees things quite differently. It measured 62.6 Ah into the pack and 87.8 Ah out while driving. It's obviously not counting the Coulombs quite correctly. I'll have to try and figure out why that is and make the numbers match. For now, I know I can drive the car quite a bit further than the Cycle Analyst numbers would indicate.

As for the range, the 25 km for a 25 cell pack of 60 Ah cells is pretty much dead on for what I had guesstimated beforehand. Doubling the cell count should double the range and give me the 50 km I had in mind originally. That's about 80 € per kilometer in battery cost with these cells.

keskiviikko 2. heinäkuuta 2014

Live for speed

Well, some speed at least. I did a little top speed test with the kWsara a couple weeks back. It was raining cats and dogs, so the circumstances were far from perfect. Nevertheless, I reached a top speed of 84 km/h (or 52 mph) on fifth gear while consuming approximately 22 kW. Not a whole lot, but rather predictable though.

The car was a petrol model, which revved several thousand rpm, so the gearbox has rather low gearing for the electric motor, which only likes to rev 2000-3000 rpm. So when 1000 rpm equals about 35 km/h on the fifth gear, you end up with less than 90 km/h at 2500 rpm. Other factors include voltage sag, which may have an effect since I still only have single set of 60 Ah cells in, and the tires, which are now the stock 185/65R14.

I'll get more cells before long to keep the voltage as high as it can be and I also just today picked up these 15" rims. They're meant for a Peugeot 307, just like my daily driver, but should also fit the Xsara. Both vehicles are from the same parent company, PSA, anyway. I'll get 185/65R15 or 195/65R15 tires for them at some point. That should increase the top speed by some 10-15% as well.


I know, the rims have the Peugeot lion on them, instead of the Citroën logo, but as I said, they are made by the same company. Also I don't really care.

For a bigger increase in top speed I'd have to spring for a transmission from a diesel model, but changing transmissions... Well, not my cup of tea.

lauantai 24. toukokuuta 2014

Driving about

We've been driving about in the EV for a few days. Just short trips to parents-in-law's for Sauna and flea market in the 6th city district. Mainly because I a bit of an issue with flywheel balance. I'll probably try to get hold of a another compatible flywheel and have a new adapter made specifically for that and have them spin balance the whole thing as one. That should give me a little bit smoother ride.

It's still already cool to drive about in a almost zero carbon way (we currently buy hydroelectric power) and hear all the noises around you while being dead silent at stops. Not bad, not bad at all.

The additional fourth support arm of the electric motor drivetrain that I just added seems to be working perfectly and stops the motor from rocking backand forth violently. It'll be shortened and all prettied up... someday.

tiistai 20. toukokuuta 2014

Got rims


I got myself some retro rims today. They need quite a bit of work to look all shiny and pretty, but I got a good deal on them. Whether they'll ever look pretty depends on the eye of the beholder, I suppose, but they suited my sense of whimsy, as Jack Rickard likes to say. They don't seem too bad aerodynamically. At least compared to a lot of rims out there. I'm pretty sure they'll fit into the Xsara, but I'm not a 100% sure. I guess we'll find out soon enough.

torstai 15. toukokuuta 2014

Energiapäivä 2014 Pori


I promised to bring a handmade EV or two to this Sustainable Energy Fair on 7th of June in Pori.