sunnuntai 9. joulukuuta 2012

Motor adapter plate

I also made a template for the motor adapter plate from a piece of particle board I found lying around.



If you look closely you may also notice that the transmission has gotten a little cleaner than before. I washed the engine compartment as well as I could given the circumstances. The adapter template should allow me to either make a CAD drawing for a complete part to be manufactured at a shop or perhaps I'll just make a copy of it using a sheet of suitably thick aluminium. We'll see which will come to be.

2 kommenttia:

  1. If it helps, you can find XU-engine mounting specs from the following address: http://www.forum-peugeot.com/Documentations/Divers/FP_DocsMoteursXU.pdf. Documents are from the '80s, but mounting information should also apply to later spec engines.

    VastaaPoista
    Vastaukset
    1. Thank you! The drawing on page 3 does match my adapter plate. This will be very useful. Thanks again.

      Poista